|Place of Origin:||Made in Austria|
|Minimum Order Quantity:||5kits|
|Delivery Time:||3-7 working days|
|Payment Terms:||T/T, , MoneyGram, RMB, D/P, D/A, L/C|
|Supply Ability:||3000kits per month|
|Name:||W&H Alegra Synea 5 LED Shadowless High Low Speed Dental Air Turbine Handpiece Kit||Brand:||W&H|
|Connector:||2 Or 4 Holes||Kit Content:||One High And One Low Speed Handpiece|
|Contra Angle:||Push Type||Low Speed:||External|
Dental Turbine Handpiece,
Shadowless Dental Turbine Handpiece,
5 LED air turbine handpiece
W&H Alegra Synea 5 LED Shadowless High Low Speed Dental Air Turbine Handpiece Kit
Advantage for 5 LED high speed Dental Air Turbine Handpiece with push button:
1. 5 LED lamp,shadowless lighting ensures brightness at all preparation area.
2.5 points spray, perfect cooling treatment.
3. Anti-skid body and non-scratch design, easy to control and more comfortable.
4. Burs would be easily changed with the push button.
Dental Air Turbine Handpiece Kit Features:
1. Internal Spray, sperated water and air supply tubing, better cooling system. Simple to operate, fast to connect.
2. Long lifespan by the Japanese ceramic ball bearing and self-lubricated system on the air motor, low-maintenance.
3. Outstanding appearance, ergonomic shape.
4. Dust-free cap on the head of straight handpiece, hygiene-friendly.
5. Forward / reverse drive.
6. Speed range from 18,000 to 21,000 rpm.
7. One set:Straight handpeice , Air motor, Contra angle
1.Before using it, please make it sure that all instruments and accessories are in good order.
2.The burs must be fixed correctly before using
3. When rotating,the head button of push-button handpiece can make the head hot. Don't make the head button ne-
ar the patiences face,or the button may hurt the patience
4. The burs should be correctly be installed to make sure its clamping strength. But the burs shouldn't be fixed wit-
h strength or the burs can be damaged then cause accident.
5. After extending use the handpiece may become noisy,replace the cartridge with a new one.failure to replace the
cartridge may cause accidents or impair patiences'hearing
6. Maintainance should be operated by professional technician.
1.Don't use non-standard burs, the shank diameter, in particular, must confirm to ISO standard of 1.59-1.60mm
2.Do not use bent, irregularily worn, or damaged burs. always keep the burs clean. dirt and debris on the shank m-
ay cause clogging of the chuck, loss of grip, or premature wear of the chuck.
3. Burs should be in order
4.Donot use short shank burs on the standard or torque head handpiece. and don't use long and big-head burs on t-
he miniature handpiece
5. Please operate burs according to manufacturers' instruction, and before operating handpiece, please install burs
Contact Person: Mandy Zhang